Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| SELECT SIZE | 10", 20" |


$25.97 – $77.99Price range: $25.97 through $77.99
5 Micron Sediment Water Filter
provides reliable particulate filtration
for compatible residential and commercial
water filtration systems.
Proudly made in Italy,
this high-quality replacement cartridge
is constructed from melt-blown
polypropylene with a specialized
gradient density structure.
Designed to capture suspended particles
such as sand, silt, rust, and dirt,
the filter helps protect downstream
filtration components while supporting
consistent water flow.
Available in 10″ and 20″
standard slimline sizes,
this sediment cartridge offers
a practical replacement option
for compatible filtration housings.
In stock and ships within one week.
IMPORTANT: SELECT YOUR FILTER SIZE
This sediment filter is available
in two cartridge sizes:
Both sizes feature a
5 micron filtration rating
and melt-blown polypropylene construction.
Please select the size that matches
your existing filter housing
before adding to your cart.
These are standard slimline cartridges,
not larger diameter Big Blue filters.
Gradient density filtration
uses a layered structure
with varying filtration
densities throughout
the cartridge.
The outer layers are
designed to capture
larger suspended
particles, while
the denser inner
layers help retain
finer sediment.
This design allows
particulate matter
to be distributed
throughout the filter
rather than collecting
only on the
outer surface.
As a result, gradient
density cartridges
can offer improved
dirt holding capacity
compared with certain
uniform-density
sediment filters.
The filter’s
5 micron rating
describes its intended
particulate filtration
performance.
Actual particle retention
depends on the cartridge’s
rating method and
operating conditions.
A 5 micron sediment
filter is designed
to capture suspended
particulate matter
from incoming water.
Common Applications:
Sediment filtration
can help improve
water clarity
when cloudiness
is caused by
suspended particles.
It also helps
reduce particulate
accumulation in
downstream cartridges.
Important:
A sediment filter
does not remove
dissolved contaminants
such as chlorine,
fluoride, arsenic,
nitrates, or
dissolved heavy metals.
It is not intended
to disinfect water
or make microbiologically
unsafe water potable.
Sediment filtration
is often the first
stage in a
multi-stage water
filtration system.
Removing suspended
particles before
water reaches
additional treatment
media helps reduce
unnecessary loading
on downstream
cartridges.
Without appropriate
sediment filtration,
particles may
accumulate in
carbon filters,
specialized
adsorptive media,
and other
treatment components.
This accumulation
can contribute
to restricted
water flow
and premature
filter replacement.
A properly selected
sediment filter
helps support
the overall
maintenance and
operation of
your filtration
system.
This Italian-made
sediment cartridge
is available in
two standard
slimline sizes.
10″ Sediment Filter
20″ Sediment Filter
Additional Specifications
Important:
These cartridges are
approximately 2.5″
in diameter and
are not intended
for 4.5″ diameter
Big Blue housings.
Both cartridge sizes
use the same type
of melt-blown
polypropylene
sediment filtration.
The primary difference
is the cartridge length
and compatible
housing size.
10″ Cartridge
Designed for compatible
standard 10″ slimline
filter housings.
Commonly used in
compact residential
filtration systems
and other applications
requiring a
10″ cartridge.
20″ Cartridge
Designed for compatible
standard 20″ slimline
filter housings.
The longer cartridge
provides additional
filter media volume
and may offer greater
dirt holding capacity
under comparable
operating conditions.
Which Should You Choose?
Select the cartridge
length that matches
your existing
filter housing.
A 20″ cartridge
cannot be installed
in a standard
10″ housing.
These sediment filters
are designed for
replacement in
compatible standard
10″ and 20″
slimline housings.
Installation should
follow the instructions
for your existing
filtration system
and housing.
General Replacement Guidance:
Recommended Replacement Interval:
Approximately 6 to 12 months,
depending on incoming
water quality and usage.
Replace sooner if
sediment accumulation
causes a noticeable
pressure drop or
restricted water flow.
Actual replacement
frequency may be
shorter in applications
with elevated
sediment levels.
Sediment filter life
depends heavily on
incoming water quality
and the amount
of particulate
matter present.
Factors affecting
replacement frequency
include:
The gradient density
design helps distribute
captured particles
throughout the
filter structure.
However, all sediment
cartridges have a
finite dirt holding
capacity and require
periodic replacement.
For systems with
high sediment loading,
more frequent replacement
may be necessary.
Monitoring changes
in water pressure
and flow can help
identify when a
sediment cartridge
is becoming restricted.
These cartridges are
intended for compatible
standard slimline
filter housings.
Available sizes include:
Please verify the
dimensions of your
existing cartridge
before ordering.
These filters are
not interchangeable
with larger diameter
Big Blue sediment
cartridges.
If you’re unsure
which cartridge
your system requires,
our team can help
confirm compatibility.
Need help selecting
the correct sediment
filter for your
existing system?
Our team can help
confirm cartridge
dimensions and
housing compatibility.
Simply send us
a photo of your
existing filter
or housing through
website chat.
You can also call
208-462-0626
for assistance.
-
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| SELECT SIZE | 10", 20" |

-
Select options This product has multiple variants. The options may be chosen on the product page
-
Read more
-
Read more
-
Add to cart