Quantum Hydro Whole Home Replacement Filter Pack | 4 Stage

Each Quantum Hydro Replacement Pack
contains the following replacement filters:

• Stage 1: Four 10″ Sediment Filters
  for routine particulate filtration
  and more frequent replacement.
• Stage 2: One Ultra-D Broad-Spectrum
  Contaminant Reduction Filter
  for specialized contaminant treatment.
• Stage 3: One CTO Carbon Block Filter
  for chlorine, taste, and odor reduction.
• Stage 4: One Granular Activated
  Carbon Polishing Filter
  for additional treatment of select
  organic compounds and taste concerns.

Seven replacement cartridges
are included in total,
supporting the four filtration stages
of your Quantum Hydro system.

The four sediment cartridges are intended
for successive replacements in Stage 1,
not simultaneous installation.

• Complete four-stage maintenance:
  Includes replacement cartridges for
  all four filtration stages.
• Whole-home water filtration:
  Helps maintain the contaminant reduction
  functions of your existing Quantum
  Hydro system.
• Multiple sediment replacements:
  Four sediment filters support
  more frequent first-stage changes.
• Specialized contaminant treatment:
  The Ultra-D stage is designed
  to address select heavy metals,
  cysts, and applicable organic contaminants.
• Activated carbon filtration:
  CTO carbon block and granular carbon
  stages help reduce chlorine,
  unpleasant tastes, odors, and
  certain organic compounds.
• Protects downstream cartridges:
  Sediment filtration captures suspended
  particles before they reach later stages.
• Supports system performance:
  Routine filter replacement helps
  maintain appropriate flow and
  filtration effectiveness.
• Legacy system support:
  Complimentary sediment configuration
  upgrade available for original
  spindown-equipped systems.

The first stage of your Quantum Hydro
system is responsible for capturing
suspended particles before water
enters the remaining filtration stages.

The included 10″ sediment cartridges
help reduce:

• Dirt and sand
• Rust particles
• Silt and sediment
• Other suspended particulate matter

Removing these particles early
in the filtration process helps
protect downstream cartridges
from unnecessary particulate loading.

Four sediment cartridges are
included to support more
frequent replacements as needed.

Sediment accumulation varies
depending on incoming water quality,
water consumption, and
local plumbing conditions.

Replace sediment filters according
to your maintenance schedule or
when excessive particulate loading
causes a noticeable reduction
in water flow.

The second filtration stage uses
the Ultra-D Broad-Spectrum
Contaminant Reduction Filter
to provide specialized treatment
for a range of water contaminants.

This cartridge is designed
to address applicable
contaminants including:

• Lead
• Arsenic
• Mercury
• Cysts
• Select organic contaminants

The specialized filtration media
provide an additional treatment
stage beyond conventional
sediment filtration.

Individual Filter Certifications:
The Ultra-D filtration component
is certified to NSF/ANSI
Standards 42 and 61.

NSF/ANSI 42 addresses specified
aesthetic effects, while
NSF/ANSI 61 addresses
health effects associated
with materials in contact
with drinking water.

These certifications do not,
by themselves, establish
certified reduction claims
for every contaminant listed.

Actual contaminant reduction
depends on water chemistry,
flow rate, and operating conditions.

View Ultra-D Filter Brochure

The third stage uses a CTO
carbon block filter to provide
additional water treatment,
particularly for chlorine,
taste, and odor concerns.

Activated carbon is widely
used in drinking water
filtration because of its
ability to adsorb certain
chemical compounds.

Primary Benefits

• Chlorine reduction
• Improved water taste
• Reduced chlorine-related odors
• Additional treatment of applicable organic compounds

The carbon block structure
also provides physical
particulate filtration,
depending on the cartridge’s
rated specifications.

Individual Filter Certification:
The CTO carbon block
filtration component
is certified to
NSF/ANSI Standard 42.

This certification applies
to the specified individual
filter component and its
certified scope, not to
the assembled Quantum
Hydro system.

View CTO Carbon Block Brochure

The final stage uses
granular activated carbon,
also known as GAC,
to provide additional
water polishing before
water leaves the system.

Granular activated carbon
provides a porous surface
that can adsorb certain
organic compounds.

Filtration Applications

• Additional taste and odor improvement
• Chlorine reduction
• Applicable organic compounds
• Certain pesticides and herbicides

This final polishing stage
complements the preceding
filters and provides
additional activated
carbon treatment.

Individual Filter Certification:
The granular activated
carbon filtration component
is certified to
NSF/ANSI Standard 42.

This certification applies
to the individual filter
component within its
certified scope, not
to the complete
Quantum Hydro system.

Reduction of individual
compounds depends on
water chemistry, contact
time, cartridge capacity,
and applicable testing.

View Granular Activated Carbon Brochure

The Quantum Hydro Replacement Pack
contains filtration components
with the following individual
NSF/ANSI certifications:

• Stage 2: Ultra-D Filter
  Certified to NSF/ANSI
  Standards 42 and 61.
• Stage 3: CTO Carbon Block Filter
  Certified to NSF/ANSI
  Standard 42.
• Stage 4: Granular Activated Carbon Filter
  Certified to NSF/ANSI
  Standard 42.

Important Certification Clarification:
These certifications apply
to the individual filtration
components as specified.

They do not represent
certification of the
complete Quantum Hydro
Whole Home Filtration System.

Individual certification
standards also do not
automatically establish
certified contaminant
reduction claims beyond
the scope of each
component’s certification.

For additional technical
information, please
refer to the individual
filter brochures linked
in the corresponding
stage descriptions.

Regular cartridge replacement
is essential to maintaining
your Quantum Hydro
filtration system.

The four sediment cartridges
included in this pack
allow for more frequent
first-stage replacement.

Sediment filters may require
replacement more frequently
than the remaining stages,
particularly when incoming
water contains substantial
amounts of suspended particles.

For the remaining filtration
stages, replacement intervals
depend on water quality,
consumption, and the
specific cartridge capacity.

Factors Affecting Filter Life

• Incoming water quality
• Daily household water consumption
• Sediment concentration
• Chlorine and organic contaminant levels
• Heavy metal concentrations
• Water flow and pressure

A reduction in flow may
indicate sediment buildup,
but it does not reliably
indicate when every
chemical filtration
cartridge has reached
its capacity.

Follow the recommended
replacement schedule
for your system and
consult our team if
you have questions.

View Filter Replacement Instructions

This replacement pack is
designed for compatible
four-stage Quantum Hydro
Whole Home Filtration Systems.

The current configuration
uses a replaceable 10″
sediment cartridge
in Stage 1.

Have an Original Spindown Filter?

Earlier Quantum Hydro
systems were equipped
with a spindown
sediment filter.

That original configuration
has been discontinued
in favor of a 10″
replaceable sediment
filter arrangement.

We offer a
complimentary upgrade
for customers who need
to transition from
the original spindown
configuration.

Please contact our team
before installing the
updated replacement pack
if your system still
uses the original
spindown setup.

Call 208-462-0626
or contact us through
website chat.

The Quantum Hydro system
uses multiple filtration
technologies to address
different categories
of water contaminants.

Each stage performs
a different function,
and the combined
filtration process
depends on the condition
and compatibility
of all four stages.

Contaminant reduction
performance can vary
based on:

• Incoming contaminant concentrations
• Water chemistry and pH
• Water flow rate
• Filter capacity
• Cartridge condition and replacement frequency

Not every contaminant
is reduced equally
by every filter.

For customers with
specific water quality
concerns, water testing
can help evaluate
the effectiveness
of the installed
filtration system.

This replacement pack
is intended to maintain
the filtration functions
of the compatible
Quantum Hydro system.

Follow the appropriate
filter replacement
instructions when
servicing your
Quantum Hydro system.

Before replacing cartridges,
shut off the incoming
water supply and
relieve system pressure
according to the
installation guide.

Install each cartridge
in its designated
filtration stage.

Inspect housing seals
and O-rings during
routine maintenance,
and check for leaks
after restoring
water pressure.

Flush replacement
cartridges according
to the applicable
instructions before
returning the system
to normal use.

View Filter Replacement Guide

Individual Filter Documentation

• 
  Stage 2: Ultra-D Filter Brochure
  
• 
  Stage 3: CTO Carbon Block Brochure
  
• 
  Stage 4: Granular Activated Carbon Brochure
  

Need help identifying
your Quantum Hydro
system configuration
or determining whether
you need the complimentary
sediment filter upgrade?

Our team can assist
with compatibility,
replacement instructions,
and general maintenance
questions.

Contact us through
website chat or call
208-462-0626.